Compatibility Jeep
Fcc ID OHT692427AA K0BDT04A
Frequency 315MHz 433.92MHz
*** YOU MUST HAVE TWO WORKING KEY FOBS TO USE THIS PROCEDURE. ***
Obtain all remote transmitters for this vehicle.
Insert the first valid key into the ignition switch. Turn the ignition to the ON position for at least 3 seconds, but no longer than 15 seconds. Then, turn the ignition switch to the LOCK position and remove the first key.
Insert the second valid key into the ignition switch. Turn the ignition switch to the ON position within 15 seconds. After 10 seconds, a chime will sound. In addition, the vehicle security light will begin to flash. Turn the ignition switch to the LOCK position and remove the second key. (Once you're done with this step, it is OK to cut the blank key to match your current key.)
Insert a blank key into the ignition switch. Turn the ignition switch to the ON position within 60 seconds. After 10 seconds a signal chime will sound. In addition, the vehicle security light will stop flashing. To indicate that programming is complete, the vehicle security light will turn on again for 3 seconds and then turn off.
The new key is now programmed. The Remote Keyless Entry transmitter will also be programmed during this procedure.
Repeat this procedure to program up to eight keys.
Please refer to your owner's manual if you are uncertain of the location of LOCK and/or ON positions.
Before You Purchase
OEM Key Fobs:
We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes:
You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars.
Englishen
No.991 Xingxiu Road,Taiwanese Investment Zone, Quanzhou, Fujian Province,P.R.China
+86 13960286508
3D Reality Showroom
